mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Disc Brakes - Vibration During Brake Application|Page 5864 > < Brakes - Roughness During Application|Page 5859
Page 1
background image

Brake Pad: All Technical Service Bulletins
Disc Brakes - Vibration During Brake Application

Article No. 
93-26-2

12/22/93

^

BRAKES - VIBRATION DURING BRAKE APPLICATION - ALL EXCEPT SHO AND POLICE MODELS

^

VIBRATION - DURING BRAKE APPLICATION - ALL EXCEPT SHO AND POLICE MODELS

FORD:
1986-93 TAURUS

LINCOLN-MERCURY: 
1986-93 SABLE

This TSB article is being republished in its entirety to correct the vehicle build date information for rotors listed in the parts block.

ISSUE:
Brake roughness, pulsation and steering wheel shudder may occur during brake application. This may be due to disc brake rotor thickness variation or to
lining material transfer (the non-uniform transfer of lining material to the rotor, producing a slip/stick condition).

ACTION:
Use Rotunda on-vehicle brake lathes to service vehicles with brake roughness, per TSB 93-13-3. This repair method is more effective than "off-car"
brake rotor turning because it allows the steering knuckle to serve as a pilot for the rotor, resulting in improved runout. If on-vehicle brake rotor turning
equipment is not available, replace the front brake rotors. Lastly, replace the front brake lining with a new less aggressive lining kit. Refer to the 1986/93
Service Manuals for removal and installation procedures.

NOTE:
IF THE DRIVING HABITS OF THE CUSTOMER OR THE LOCAL TERRAIN CALL FOR FREQUENT BRAKE APPLICATION (FOR
EXAMPLE, FREQUENT DESCENTS OF HILLS/MOUNTAINS WHILE BRAKING), THE NEW STYLE LININGS ARE NOT RECOMMENDED.

NOTE:
AFTER REPLACING THE ROTORS AND LININGS, IT IS VERY IMPORTANT THAT THE CUSTOMER LIMITS BRAKING TO
MEDIUM-TO-LIGHT STOPS FOR THE FIRST 200 MILES AS DESCRIBED IN THE OWNER MANUAL. THIS WILL GREATLY REDUCE THE
CHANCE OF LINING TRANSFER.

CAUTION:
NEW STYLE LINING KITS F20Y-2001-A AND F3DZ-2001-C ARE NOT TO BE USED ON "SHO" OR POLICE MODELS. THEY ARE NOT
SUITABLE FOR PERFORMANCE OR SEVERE SERVICE APPLICATIONS.

OTHER APPLICABLE ARTICLES:
90-19-9, 91-8-9, 92-12-4, 93-13-3
SUPERSEDES: 93-22-2
WARRANTY STATUS:
Eligible Under The Provision Of The Bumper To Bumper Warranty Coverage For 1992/93 Models, Basic Warranty Coverage For All Other Models

OPERATION

DESCRIPTION

TIME

932602A

Replace Lining Assemblies

1.9 Hrs.

and Machine Rotors

932602B

Replace Lining Assemblies

1.2 Hrs.

Disc Brakes - Vibration During Brake Application|Page 5864 > < Brakes - Roughness During Application|Page 5859