Sable V6-232 3.8L (1988)
Brake Master Cylinder: Service and Repair
Rebuild
Master Cylinder - Wagon
Master Cylinder - Sedan
DISASSEMBLY
1. Clean the outside of the master cylinder thoroughly. Remove cap. Drain all brake fluid from cylinder.
NOTICE: Always discard used brake fluid.
Snap Ring
2. Depress primary piston and remove snap ring from retaining groove at the open end of the bore.
NOTICE: If master cylinder is to be put into vise to aid in disassembly, mount into vise by flange only to avoid damage to bore or reservoir