Sable V6-232 3.8L (1988)
Radiator Cooling Fan Control Module: Service and Repair
Fan, Motor and Integrated Relay Control Assembly
Removal and Installation
Integrated Relay Control Module
Fig. 41 Cooling Fan Motor Replacement
1. Remove radiator sight shield.
2. Disconnect electrical connector. Remove integrated relay control assembly located on radiator support.
3. Disconnect electric fan connector.
4. Unbolt fan/shroud assembly from radiator.
5. Rotate fan/shroud assembly and remove past radiator.
6. Remove fan U-spring retainer from motor shaft and remove fan.
7. Unbolt fan motor from shroud.
8. To install, reverse Steps 1 through 7.
