Sable V6-232 3.8L (1988)
EMISSIONS CONTROL SYSTEM
MODIFICATIONS KIT "A"
INSTALLATION INSTRUCTIONS
AFFECTED VEHICLES:
1988 Model Taurus/Sable - California 3.8L engines
Catalytic Converter
Removal
1.
Raise vehicle.
2.
Remove front and rear catalytic converter flange fasteners and bolt and spring attachment at transaxle.
3.
Separate catalytic converter inlet and outlet flange connections.
4.
Remove catalytic converter.
5.
Remove HEGO sensor.
Installation
1.
Reinstall HEGO sensor.
2.
Loosely install converter to underbody converter.
3.
Install converter to manifold connections.
4.
Install bolt and spring to converter and transaxle.