Sable V6-232 3.8L (1988)
The preprinted Authorized Modifications Decal shown is provided in the parts kit.
^
Insert your P & A Code and date and attach the Authorized Modifications Decal to a clean surface on the fan shroud.
^
Place the clear overlay on the decal.
Continental
EMISSIONS CONTROL SYSTEM
MODIFICATIONS KIT "B"
INSTALLATION INSTRUCTIONS
AFFECTED VEHICLES:
1988 Model Continental - California 3.8L engines
Catalytic Converter
1.
Raise vehicle.
2.
Remove front and rear catalytic converter flange fasteners and bolt and spring attachment at transaxle.
3.
Separate catalytic converter inlet and outlet flange connections.
4.
Remove catalytic converter.
5.
Remove HEGO sensor.
Installation
1.
Reinstall HEGO sensor.
2.
Loosely install converter to underbody converter.
3.
Install converter to manifold connections.
4.
Install bolt and spring to converter and transaxle.