Sable V6-232 3.8L (1988)
5.
Align exhaust system to specification. Starting at front of system, tighten all nuts and bolts to specification shown in illustration.
6.
Check system for leaks and lower vehicle.
Thermactor Air System
Removal and Installation
1.
Remove engine drive belt.
2.
Remove thermactor air pump pulley. Discard pulley and retaining bolts.
3.
Remove inlet and outlet hoses from thermactor air pump.
4.
Disconnect thermactor air pump inlet hose from air cleaner assembly. Discard hose.
5.
Install cap on air cleaner assembly where hose was removed.
6.
Install new engine drive belt.
Evaporative Emissions
Removal and Installation
1.
Remove crankcase vent tube between PCV valve and intake manifold. Discard tube.
2.
Install new crankcase vent tube with nipple for fuel vapor hose pointing up.