mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Recall - Emission Control System Modification|Page 4186 > < Recall - Emission Control System Modification|Page 4184
Page 3
background image

Parts will not be direct shipped for this recall. Order your parts requirements through normal order processing channels.

Part prices are current until the next issue of the Master Price Book. For the latest price(s) call an Order Processing Center or check an updated Master
Price book of DOES II.

PARTS RETURN

PROCESSORS

An FPS-700 Parts Disposition Tag will be issued to recall the removed electronic engine control processors. Return of processors with the FPS-700 tag
attached must be shipped prepaid freight to the address on the reverse side of the tag.

Refer to the part return shipping procedure in Section 7.0, of the Warranty and Policy Manual.

CATALYSTS

Removed catalysts must be returned. Prepare and return the removed catalysts by removing excess weight. Cut and discard pipes/flanges as close to the
catalyst shell as practical.

An FPS-700 Parts Disposition Tag will be issued to recall the removed catalysts. Return of removed catalysts with the FPS-700 tag attached must be
shipped prepaid freight via United Parcel Service (UPS) to the address on the reverse side of the tag.

Refer to the part return shipping procedure in Section 7.0, of the Warranty and Policy Manual.

ANY QUESTIONS REGARDING THE HANDLING OF SPECIAL SITUATIONS REGARDING REMOVED CATALYSTS SHOULD BE
RESOLVED WITH YOUR SERVICE ZONE MANAGER.

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from Ford Parts and Service Division in accordance with Policy Procedure Bulletin 4000.

Taurus/Sable

Recall - Emission Control System Modification|Page 4186 > < Recall - Emission Control System Modification|Page 4184