Sable V6-232 3.8L (1988)
Fuel Injector: All Technical Service Bulletins
Fuel Injectors - Rotunda Injector Tester/Cleaner
INJECTOR TESTER/CLEANER-ROTUNDA MODEL 113-00001-MAINTENANCE REQUIREMENTS
Article No. 89-15-3
FORD:
1984-89 ESCORT, EXP, TEMPO 1986-89 CROWN VICTORIA, MUSTANG, TAURUS, THUNDERBIRD
LINCOLN-MERCURY: 1984-89 COUGAR
1984-87 LYNX 1984-89 TOPAZ 1986 CAPRI 1986-89 CONTINENTAL, GRAND MARQUIS, MARK VII, SABLE,
TOWN CAR 1988-89 TRACER
MERKUR: 1987-89 XR4TI 1988-89 SCORPIO
LIGHT TRUCK: 1985-89 F-150, F-250, F-350, RANGER 1986-89 AEROSTAR, ECONOLINE
ISSUE:
Proper maintenance and good working condition of the Rotunda Injector Tester/Cleaner, 113-00001, is essential for reliable diagnosis and
cleaning of multi-port fuel injectors. If the equipment is not properly maintained, premature failure can result and flowmeter contamination
can occur. This can cause erroneous float readings and result in improper diagnosis.
ACTION:
Use the following injector tester/cleaner maintenance techniques and procedures to ensure proper operation of the equipment.
1.
Always use a good quality, clean and filtered gasoline in the tester tank.
2.
Never leave a mixture of injector power flush and gasoline in the tester after use.
3.
Always rinse the tester out by circulating clean gasoline through the unit before storage.
4.
Flush the unit with denatured alcohol at least once a month.
a.
Allow the fluid to recirculate several minutes, while switching the flowmeter selection valve from # 1 to # 2 several times.
b.
Discard the mixture and repeat the procedure.
5.
Change the fuel filter every other month.
6.
Always calibrate the flowmeters before testing.
OTHER APPLICABLE ARTICLES: 88-17-11
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:
680000, 4500
