mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Throttle Position Sensor > < Diagram Information and Instructions|Page 3243
Page 1
background image

Fuel Pump Inertia Switch: Description and Operation

Inertia Fuel Shutoff (IFS) Switch

In the event of a collision, the electrical contacts in the inertia fuel shutoff switch (IFS switch) open and the fuel pump automatically shuts off.

-

The fuel pump will shut off even if the engine does not stop running. However, the engine will stop a few seconds after the fuel pump stops.

-

It is not possible to restart the engine until the inertia fuel shutoff switch is manually reset.

Caution: Do not reset the inertia fuel shutoff switch until the fuel system has been inspected for leaks.

-

To reset the inertia fuel shutoff switch, press the button on top of switch.

Note:  In the reset position it is possible to force the button down an additional 1.59 mm (1/16 inch) against a spring load.
This is a normal condition.

Throttle Position Sensor > < Diagram Information and Instructions|Page 3243