Sable V6-232 3.8L (1988)
Fluid Filter - A/T: Technical Service Bulletins
A/T - AXODE/AXOD New Design Filter Service Tip
Article No.
95-3-14
02/13/95
TRANSAXLE - AXOD - AXODE - AX4S - NEW DESIGN FILTER INSTALLATION INSTRUCTIONS - SERVICE TIP
FORD:
1986-93 TAURUS
LINCOLN-MERCURY:
1986-93 SABLE
1988-93 CONTINENTAL
ISSUE:
The Instruction Sheet (I.S. # 6594) for the new design Transaxle Filter Kit (F4DZ-7A098-B) was inadvertently omitted from some of the kits.
ACTION:
When installing this newly designed filter, the reverse clutch tube support bracket must be replaced with the new reverse clutch tube support bracket
from the kit. Refer to Figure 1. The newly designed filter does not require a bracket to hold it in place, but the reverse clutch tube still needs to be
supported. The new bracket will support the reverse clutch tube and will not interfere with the new filter.
For 1994 and beyond, the transaxle has the new design clutch tube support bracket installed. Therefore, it is not necessary to change the tube support
bracket.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 504000, 590000
