Sable V6-3.0L DOHC VIN S (2002)
Front Bumper Cover / Fascia: Service and Repair
FRONT BUMPER COVER
Removal and Installation
All Vehicles
1. Remove the headlamps.
2. Raise and support the vehicle.
3. NOTE: If equipped, remove the five pin-type retainers from the chin spoiler.
Remove the air dam.
1
Remove the seven screws.
2
Remove the three bolts.
3
Remove the air dam.
4. Remove the LH and RH front fender splash shields.
1
Remove the eight screws.
2
Remove the two pin-type retainers.
3
Remove the front splash shields.
5. Remove the front bumper cover bolts.
Taurus