Sable V6-3.0L DOHC VIN S (2002)
Parking Brake Cable: Service and Repair
Parking Brake Cable - Front
Parking Brake Cable - Front
Removal and Installation
NOTE: Make sure the parking brake is in the released position.
1. Remove the scuff plate.
2. Pull the carpet back and push the front parking brake cable and conduit grommet through the floor pan.
3. Disconnect the front parking brake cable and conduit.
1
Disconnect the cable.
2
Squeeze the retainer and pull the cable and conduit out of the parking brake control.
4. Raise the vehicle on a hoist.
