Sable V6-3.0L DOHC VIN S (2002)
6. Disconnect the crankcase ventilation tube from the valve cover.
7. NOTE: Engine removed for clarity.
Remove the nut and position the EVAP tube aside.
8. Remove the bolts, studs and the RH valve cover.
-
Remove and discard the gasket.
Installation
1. Install a new valve cover gasket on the valve cover.
2. NOTE: Apply a 5 mm (0.2 inch) dot of gasket and sealant to the front cover to cylinder head joints.
Position the valve cover and install the bolt and the studs in the sequence shown.