Sable V6-3.0L DOHC VIN S (2002)
4. NOTE: Fasteners No. 1 and 6 are studs.
Position the cover and install the bolts in the sequence shown.
5. Install the A/C bracket.
1
Position the bracket.
2
Install the bolts.
Tighten the bolts in two stages.
-
Stage 1: Tighten to 25 Nm (18 ft. lbs.).
-
Stage 2: Tighten 90°.
3
Install the engine mount bolts.
6. Raise the vehicle.
7. Position the A/C compressor and install the two lower bolts.
