Sable V6-3.0L DOHC VIN S (2002)
Water Pump: Service and Repair
WATER PUMP - 3.0L (4V)
Removal
1. Raise and support the vehicle.
2. Drain the cooling system.
3. Remove the splash shield.
4. Disconnect the heater water hose from the bottom of the water pump.
5. Remove the radiator lower tube bolt.
6. Lower the vehicle.
7. Remove the air cleaner assembly.
8. Remove the battery and battery tray.
9. Remove the water pump belt.
10. Remove the radiator upper front tube bolt.
11. Disconnect the upper radiator hose and engine vent hose.