Sable V6-3.0L DOHC VIN S (2002)
^
Enter claims using DWE.
^
Refer to ACESII Manual for claims preparation and submission information.
^
Use code information shown below:
^
Claim Code - 01T05
^
Causal Component - 18572
^
Condition Code - 79
^
Labor Operation - 01T05A or 01T05B
^
Customer Concern Code - F99
Labor Allowances
Parts Requirements
NONE
Questions?
Claims Information: 1-800-423-8851
Special Service Support Center: 1-800-325-5621
Technical Instructions
1.
Inspect the position of the heater hose clamps at the heater core inlet and outlet fittings.
The clamps should be positioned so that the outer edge of the clamps are approximately 4 mm - 5 mm (3/16 inch) from the end of the heater hose.
2.
If the clamps are not properly positioned, adjust their position as described above.
3.
Check engine coolant level and top off if necessary. *
* In those rare cases where the addition of coolant is necessary, please charge this coolant to the claim.
