Sable V6-3.0L DOHC VIN S (2002)
Transmission Speed Sensor: Service and Repair
AX4S
Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) Sensor
Removal and Installation
1. Disconnect the battery ground cable.
2. Raise the vehicle on a hoist.
3. NOTE: Support the exhaust with mechanic wire.
Remove the nuts and disconnect the three-way catalytic converter from the dual converter Y-pipe.
4. Disconnect the output shaft speed (OSS) sensor connector.
5. Remove the output shaft speed (OSS) sensor cover.
1. Remove the connector.
2. Remove the bolt.
3. Remove the cover.
