Sable V6-3.0L DOHC VIN S (2002)
5. Pull out the third row seat belt guide insert in the quarter trim panel and position it back through the opening.
Both retractors
6. If positioned upward, position the third row seat back down.
7. From behind the safety belt guide, release the tabs on each side and carefully pull out and remove the safety belt guide cover.
NOTE: If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
8. Remove the third row safety belt guide.
1
From behind the quarter trim panel, put a wrench on the second row safety belt guide retaining stud.
2
While holding the hidden fastener, use special tool 501-010 (T77L-2100-A), and remove the bolt.
3
Remove the third row safety belt guide.
NOTE: A hidden fastener for the second row retractor is behind the quarter trim panel.
Driver side
