Sable V6-3.0L DOHC VIN S (2002)
13. Install the driver seat front bolts.
14. Install the driver seat front trim covers.
15. Connect the battery ground cable.
16. With the other restraint system diagnostic tools still in place, prove out the SRS. See: Air Bag(s) Arming and Disarming/Service and Repair/Prove
Out Procedure
17. Reactivate the supplemental restraint system (SRS). Refer to Air Bag(s) Arming and Disarming.
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS,
NOTES AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEACTIVATION AND REACTIVATION
PROCEDURE.
18. With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL(S) ARE FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE
FROM THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE
VIOLATION OF VEHICLE SAFETY STANDARDS.
19. Check the active restraint system for correct operation.
Passenger Side
