Sable V6-3.0L DOHC VIN S (2002)
Heated Oxygen Sensor: Service and Repair
EGO Sensor Wrench
SPECIAL TOOL(S)
REMOVAL
1. Disconnect the HO2S electrical connector.
2. Remove the HO2S from the exhaust manifolds using the special tool.
^
If necessary, lubricate the heated oxygen sensors with lock lubricant to assist in removal.
INSTALLATION
1. To install, reverse the removal procedure.
^
Apply a light coat of anti-seize lubricant to the threads of the Heated Oxygen Sensors (HO2S).
