Sable V6-3.0L DOHC VIN S (2002)
Shift Cable: Service and Repair
Selector Lever Cable and Bracket-Floor Shift
Selector Lever Cable and Bracket-Floor Shift
Removal
1. Remove the center console.
2. Disconnect the selector lever cable from the selector lever.
^
Remove the selector lever cable from the transaxle range selector lever.
^
Depress the tab on the selector lever cable and remove the cable from the selector lever housing.
3. Remove the rear air distribution duct, if necessary.
4. Disengage the rubber grommet from the bulk head.
^
Working from the passenger compartment, pull the insulation back to access the rubber grommet.
5. Remove the selector lever cable from the manual lever.
