mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Door Sensor/Switch (For Alarm) > < Alarm System Transponder|Locations|Page 6020
Page 2
background image

5. Remove the lower instrument panel steering column cover.

1

Remove the screws.

2

Remove the lower instrument panel steering column cover.

6. Remove the instrument panel steering column opening cover reinforcement.

1

Remove the bolts.

2

Remove the instrument panel steering column opening cover reinforcement.

7. NOTE:  The steering wheel has been removed for clarity.

Remove the anti-theft transceiver module.

1

Remove the screw from the bottom of the transceiver module.

2

NOTE:  Only apply pressure or leverage below the key cylinder lower rib.

Disconnect the electrical connector and remove the module.

INSTALLATION

1. To install, reverse the removal procedure.

Door Sensor/Switch (For Alarm) > < Alarm System Transponder|Locations|Page 6020