Sable V6-3.0L VIN 2 Flex Fuel (2005)
Rear Door Exterior Handle: Service and Repair
EXTERIOR REAR DOOR HANDLE
REMOVAL
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Disconnect the exterior door handle actuating rod from the latch.
-
Open the clip.
4. Unclip the lock rod guide and remove the guide from the bracket.
-
Discard the lock rod guide bushing.
5. Remove the two bolts and the exterior door handle.
6. Transfer all necessary components.
INSTALLATION
1. To install, reverse the removal procedure.
