Sable V6-3.0L VIN 2 Flex Fuel (2005)
Front Fender Liner: Service and Repair
FENDER SPLASH SHIELD
Removal and Installation
NOTE: The wheel and tire assembly has been removed for clarity.
1. Raise and support the vehicle.
2. Remove the front fender splash shield.
1
Remove the screws.
2
Remove the pin-type retainer.
3
Remove the front fender splash shield.
3. Remove the front pin-type retainers and position the front rocker panel moulding aside.
4. Remove the rear fender splash shield.
-
Remove the screws and the pin-type retainers.
5. To install, reverse the removal procedure.
