Sable V6-3.0L VIN 2 Flex Fuel (2005)
2. Place a box-end wrench on the RH rear bleeder screw. Attach a rubber drain tube to the RH rear bleeder screw and submerge the free end of the
tube in a container partially filled with clean DOT 3 motor vehicle brake fluid.
Vehicles with rear disc brakes
3. Place a box-end wrench on the RH rear bleeder screw. Attach a rubber drain tube to the RH rear bleeder screw and submerge the free end of the
tube in a container partially filled with clean brake fluid.
All vehicles
4. Have an assistant pump, and then hold firm pressure on, the brake pedal.
5. Loosen the RH rear bleeder screw until a stream of brake fluid comes out. While an assistant maintains pressure on the brake pedal, tighten the RH
rear bleeder screw.
^
Repeat until clear, bubble-free fluid comes out.
^
Refill the brake master cylinder reservoir as necessary.
Vehicles with rear drum brakes
