Sable V6-3.0L VIN 2 Flex Fuel (2005)
Key Reminder Switch: Service and Repair
KEY-IN-IGNITION WARNING SWITCH
REMOVAL
1. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
2. Remove the key in ignition warning switch.
1
Pry the clip down.
2
Push the key in ignition warning switch off the rear of the ignition switch lock cylinder
INSTALLATION
1. To install, reverse the removal procedure.
-
Verify ignition switch lock cylinder operation.
