Sable V6-3.0L VIN 2 Flex Fuel (2005)
Pressure Feedback Exhaust Sensor: Service and Repair
DIFFERENTIAL PRESSURE FEEDBACK EXHAUST GAS RECIRCULATION (EGR) SYSTEM
REMOVAL
1. Disconnect the battery ground cable.
2. Release the pin-type wire retainer from the differential pressure feedback exhaust gas recirculation (EGR) sensor.
3. Remove the differential pressure feedback EGR system.
-
Disconnect the electrical connector.
-
Remove the differential pressure feedback EGR sensor from the vacuum hoses.
INSTALLATION
1. To install, reverse the removal procedure.