Sable V6-3.0L VIN 2 Flex Fuel (2005)
Engine Control Module: Service and Repair
Removal and Installation
POWERTRAIN CONTROL MODULE (PCM)
Removal and Installation
All vehicles
1. Disconnect the battery ground cable.
2. Remove the wiper mounting arm and pivot shaft assembly.
Vehicles with 3.0L 2V engine
3. Remove the intake manifold runner (IMRC) control valve.
1
Disconnect the IMRC valve electrical connector.
2
Remove the IMRC valve retainer screws and the IMRC valve.
All vehicles
4. Disconnect the powertrain control module (PCM) electrical connector and remove the gasket.
Vehicles with 3.0L 2V engine
5. Disconnect the vacuum hose from the exhaust gas recirculation (EGR) valve.