Sable V6-3.0L VIN 2 Flex Fuel (2005)
4. CAUTION:
-
It is necessary to rezero the OCS system when a front passenger seat cushion is disassembled, a new trim cover installed, or an OCS
service kit is installed. A diagnostic tool is used to trigger the active command to carry out rezeroing of the OCS system.
-
Inspect the seat cushion pad and seat cushion trim cover for any foreign objects, before installing the seat cushion trim cover to the
seat cushion pad. If any foreign objects are found, remove them. Failure to do so may result in personal injury, in the event of an air
bag deployment.
Align the seat cushion trim cover to the seat cushion foam pad and attach the hook-and-loop strips.
Vehicles having an original equipment occupant classification sensor installed
5. CAUTION: While positioning the seat cushion frame and occupant classification sensor assembly, be careful not to damage any of the
components. Failure to do so can result in component failure.
NOTE: The ECU must be correctly positioned and securely fastened in place. Failure to do so can set a diagnostic trouble code (DTC) in the
restraints control module (RCM).
Install the electronic control unit (ECU).
1
Position the ECU to the bracket.
2
Install the rivets.
3
Connect the electrical connector.
6. CAUTION:
-
Inspect the occupant classification sensor assembly, seat cushion frame and support assembly for any foreign objects before installing
the occupant classification sensor assembly to the seat cushion frame. If any foreign objects are found, remove them. Failure to do so
may result in personal injury, in the event of an air bag deployment.
-
Failure to route the seat occupant sensor components through the correct seat cushion support opening can cause component failure.
-
While positioning the seat cushion frame and occupant sensor assembly, be careful not to damage any of the components. Failure to
do so can result in component failure.
