Sable V6-3.0L VIN 2 Flex Fuel (2005)
8. Remove the nut, flag bolt, and rear lower control arm.
-
Discard the nut and flag bolt.
Installation
NOTE: When installing lower control arms, the offset must face up. The arms are stamped "BOTTOM" on the lower edge. The flanges of the rear
lower control arm must face the front of the vehicle. The flanges on the front control arms must face the rear of the vehicle.
Rear lower control arm
1. Position the rear lower suspension arm and install a new flag bolt, and a new nut.
-
Do not tighten the nut at this time.
Front lower control arm
2. Position the front lower control arm and the adjusting cam, and install a new flag bolt and nut.
-
Do not tighten the nut at this time.
