Sable V6-3.0L VIN 2 Flex Fuel (2005)
12. Remove the inlet fluid cooler tube from the radiator support.
13. Disengage the retaining clip.
14. Using the special tool, disconnect the inlet fluid cooler tube from the radiator fitting.
15. To install, reverse the removal procedure.
^
Fill the transaxle to the specified level.
^
Connect the fluid cooler tubes into the transaxle fitting until the plastic retainer engages the first tube bead. (A definite "click" should be
heard.) Pull back on the line to verify full engagement.
^
Connect the fluid cooler tubes into the radiator fitting until the retainer engages the first tube bead. (A definite "click" should be heard.) Pull
back on the line to verify full engagement.
^
Use new clamps, position within hose markings.
