Sable V6-3.0L VIN U (1999)
Front Door Exterior Handle: Service and Repair
REMOVAL
1. Remove door trim panel and watershield.
2. Tape or otherwise protect area of door around door outside handle opening to prevent paint damage.
3. Remove two screws retaining outside front door handle to front door, and pull outside front door handle outward from front door.
4. Disconnect door latch actuator rod from outside front door handle and remove door handle.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining screws to 6-8 Nm (54-70 lb-in).