Sable V6-3.0L VIN U (1999)
9. Remove three screws attaching front door latch to front door.
10. Remove front door latch (with push button rod and key cylinder rod attached) from front door cavity.
11. Remove cable watershield and cable from door latch.
12. To remove door ajar switch, use a flat-blade screwdriver to gently pry apart inner latch casing while twisting door ajar switch clockwise (for RH
door latch) or counterclockwise (for LH door latch) until switch releases. Remove door ajar switch.
13. To remove adjunct door latch actuator, release retaining tab on actuator and slide actuator off door latch.
14. Transfer components to new front door latch as necessary.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten front door latch retaining screws to 10-14 Nm (89-123 lb-in).
