mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Trunk / Liftgate Hinge|Service and Repair > < Liftgate Window Glass Weatherstrip|Service and Repair
Page 1
background image

Trunk / Liftgate Hinge: Adjustments

1. Open the luggage compartment door and note the pop-up distance. The luggage compartment door should pop up 15-30 cm (6-11 inches).
2. If the luggage compartment door does not pop up 15-30 cm (6-11 inches), the luggage compartment door/tailgate hinge torsion bar tension should

be increased.

3. If the luggage compartment door pops open with more force than is desired, the luggage compartment door/tailgate hinge torsion bar tension can

be decreased.

4. Support the luggage compartment door in the full open position before adjusting the luggage compartment door/tailgate hinge torsion bar.

WARNING: USE CARE WHEN ADJUSTING THE UPPER LUGGAGE COMPARTMENT DOOR/TAILGATE HINGE TORSION
BAR OR LOWER LUGGAGE COMPARTMENT DOOR/TAILGATE HINGE TORSION BAR AS IT IS UNDER TENSION AND
COULD SPRING OUT OF CONTROL IF NOT HANDLED PROPERLY.
 

5. To adjust a luggage compartment door/tailgate hinge torsion bar, move the luggage compartment door/tailgate hinge torsion bar end to another

position (notch) to increase or decrease the tension.

6. Adjust one luggage compartment door/tailgate hinge torsion bar and check the adjustment before adjusting the other luggage compartment

door/tailgate hinge torsion bar.

7. If proper adjustment can still not be obtained replace torsion bars and repeat adjustment procedure.

Trunk / Liftgate Hinge|Service and Repair > < Liftgate Window Glass Weatherstrip|Service and Repair