Sable V6-3.0L VIN U (1999)
Brake Pedal Assy: Adjustments
Brake Pedal Height
1. With the engine running for full power brake operation and the parking brake control fully released, measure the brake pedal free height.
2. Insert a slender, sharp-pointed prod through the carpet and sound deadener to the dash panel metal. Measure the distance to the top of the brake
pedal pad on side of brake pedal pad nearest to accelerator pedal.
Brake Pedal Height/Travel Specifications
3. NOTE: "A" Dimension to be measured to sheet metal from center of pad nearest accelerator pedal.
"B" Dimension to be measured parallel to the vertical center line of the steering column with a 111 N (25 lb) load applied to the center line of the
brake pedal pad. (Perform checks with engine running.)
4. NOTE: Vehicle close to the maximum pedal travel specification may be improved by bleeding the brake system.
If the position of the brake pedal is not within specification, check the brake pedal for missing, worn, or damaged bushings, or loose retaining
bolts. Replace as required.
If the pedal free height is still out of specification, check the brake pedal, power brake booster, or brake master cylinder to be sure the correct parts
are installed. Replace the worn or damaged parts as necessary.
