Sable V6-3.0L VIN U (1999)
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Remove two screws retaining accelerator control splash shield to accelerator cable bracket. Remove accelerator control splash shield.
2. Remove screw retaining speed control actuator cable to accelerator cable bracket.
3. Remove speed control actuator cable from throttle body.
4. Remove speed control actuator cable cap from the speed control servo by pressing cap locking tab and rotating the cap counterclockwise.
5. Remove speed control actuator cable slug from speed control servo pulley. Gently push actuator cable slug past retaining spring using a small
screwdriver.
