Sable V6-3.0L VIN U (1999)
3. Locate oil pan gasket to oil pan with sealing bends against oil pan surface and secure with Gasket and Trim Adhesive F3AZ-1913508-AA or
equivalent meeting Ford specification ESE-M2G52-A.
4. Position oil pan.
5. Install oil pan retaining bolts. Tighten to 10-14 Nm (89-123 inch lbs.).
6. Back off all bolts and retighten.
7. Install engine rear plate to the converter housing.
8. Install dual converter Y pipe. Connect the engine control sensor wiring to the heated oxygen sensors.
9. Install starter motor and brace.
10. Lower vehicle.
11. Replace oil level dipstick.
12. Connect battery ground cable.
13. Fill crankcase to proper level with Motorcraft Super Premium 5W30 Motor Oil XO-5W30-QSP or equivalent meeting Ford specification
WSS-M2C153-G.
14. Start engine and check for engine oil and exhaust leaks.
