Sable V6-3.0L VIN U (1999)
10. Hand-tighten water pump pulley retaining bolts.
11. Install crankshaft damper and crankshaft pulley. Tighten damper retaining bolt to 125-165 Nm (93-121 ft. lbs.) and the four pulley retaining bolts
to 40-55 Nm (30-44 ft. lbs.).
12. If crankshaft position sensor was removed from engine front cover, install crankshaft position sensor and tighten retaining bolts to 5-7 Nm (45-61
inch lbs.).
13. Install drive belt tensioner.
14. Install drive belt. Tighten water pump pulley retaining bolts to 20-30 Nm (15-22 ft. lbs.).
15. Install lower radiator hose and heater water hose. Clamp securely.
16. Fill and bleed engine cooling system.
17. Fill crankcase to proper level with Motorcraft Super Premium 5W30 Motor Oil XO-5W30-QSP or equivalent meeting Ford specification
WSS-M2C153-G.
18. Connect battery ground cable.
19. Start engine and check for coolant, exhaust and oil leaks.
