Sable V6-3.0L VIN U (1999)
Turn Signal Switch: Description and Operation
The multi-function switch assembly, which is mounted to the steering actuator housing, provides electrical switching for:
-
turn signal.
-
headlamp dimmer.
-
headlamp flash-to-pass.
-
hazard warning.
-
cornering lamps.
-
windshield washer/wiper.
NOTE: The turn signal system is deactivated when the hazard flasher system is on. Turn signal lever motion does not affect the hazard flasher
system.
The turn signal switch is incorporated in the multi-function switch.
The turn signals operate in the following manner:
-
Turn ignition switch to RUN.
-
Move turn signal switch lever to the end-of-travel position to indicate a normal full turn.
-
The lever will remain in position without effort until the turn is completed.
-
The turn indicator cancel cam will automatically cancel the turn signal.
Operate the lane change system as follows:
-
Move and hold the turn signal lever to the first stop position when changing lanes.
-
Releasing the lever will return it to its normal position when the maneuver is over.
