Sable V6-3.0L VIN U (1999)
Alignment: Service and Repair
Alignment Procedure
NOTE: Vehicles that require camber/caster adjustment can be corrected by loosening the front sub-frame retaining bolts and shifting the front
sub-frame as required. If further adjustment is required, use the following procedure:
1. Center-punch four spot welds on alignment plate(s).
2. Loosen three nuts attaching front shock absorber mounting bracket to vehicle.
3. CAUTION: Do not cut deeper than necessary to remove alignment plate to prevent damage.
Use Rotunda Compound Spot Weld Drill Kit 107-R 1000 or equivalent to remove four welds.
CAUTION: DO NOT CUT DEEPER THAN THICKNESS OF ALIGNMENT PLATE.
4. Remove three nuts attaching front shock absorber mounting bracket to vehicle.
5. Remove alignment plate.
