mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Alignment|Page 1387 > < Alignment
Page 2
background image

Maximum ..........................................................................................................................................................................................................  +0.31°

mm/inch:

Nominal ...............................................................................................................................................................................  +0.762 mm (+0.030 inch)
Minimum .................................................................................................................................................................................  -2.41 mm (-0.095 inch)
Maximum ..............................................................................................................................................................................  +3.94 mm (+0.155 inch)

TOE, TOTAL 

Degree:

Nominal .............................................................................................................................................................................................................  +0.12°
Minimum ............................................................................................................................................................................................................  -0.13°
Maximum ..........................................................................................................................................................................................................  +0.37°

mm/inch:

Nominal .................................................................................................................................................................................  +1.52 mm (+0.060 inch)
Minimum .................................................................................................................................................................................  -1.52 mm (-0.060 inch)
Maximum ..............................................................................................................................................................................  +4.70 mm (+0.185 inch)

[a] Camber is factory set and cannot be adjusted.

NOTE:

-

All specifications are given for a vehicle at curb height with a 1/2 tank of fuel.

-

Positive value is toe-in, negative value is toe-out.

-

Values are for left and right hand.

Alignment|Page 1387 > < Alignment