Sable V6-3.0L VIN U (1999)
REMOVAL
1. Disconnect Differential Pressure Feedback EGR Sensor from EGR valve to exhaust manifold tube.
2. Disconnect EGR valve to exhaust manifold tube at EGR valve (EGR valve) and EGR valve tube to manifold connector.
3. Remove EGR valve tube to manifold connector from RH exhaust manifold if required.
INSTALLATION
1. Follow removal procedure in reverse order.
2. On this engine, tighten EGR valve to exhaust manifold tube nuts to 35-65 N.m (26-47 Lb-Ft).
3. Tighten EGR valve tube to manifold connector to exhaust manifold to 35-65 N.m (26-47 Lb-Ft), if removed.
California Emissions