Sable V6-3.0L VIN U (1999)
4. Pull coupling male and female fittings apart.
5. Remove Spring Lock Coupling Disconnect Tool from the disconnected spring lock coupling.
6. Clean fittings with solvent.
NOTE: Inspect coupling for missing or damaged O-rings. It either O-ring is damaged, both O-rings must be replaced. Replace O-rings or garter
springs with the appropriate replacement parts only.
INSTALLATION
1. Lubricate O-rings with clean engine oil.
Garter Spring
2. Insert male fitting into female fitting and push together until garter spring is engaged.
3. Pull on fittings to ensure coupling engagement.