mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
Output Shaft Speed Sensor <--> [Transmission Speed Sensor, A/T]|AX4N|Page 4836 > < Output Shaft Speed Sensor <--> [Transmission Speed Sensor, A/T]|AX4N|Page 4833

Sable V6-3.0L VIN U (1999)

Page 1
background image

Output Shaft Speed Sensor: Service and Repair
AX4N

Removal 

1. Disconnect battery ground cable and positive battery cable. 
2. Remove battery and battery tray.
3. Disconnect Turbine Shaft Speed (TSS) sensor electrical connector.
4. Remove one bolt and TSS from transaxle.

Installation 

1. Follow removal procedure in reverse order.
2. Tighten TSS retaining bolt to 9-12 Nm (80-106 inch lbs.). 

Output Shaft Speed Sensor <--> [Transmission Speed Sensor, A/T]|AX4N|Page 4836 > < Output Shaft Speed Sensor <--> [Transmission Speed Sensor, A/T]|AX4N|Page 4833