Sable V6-3.0L VIN U (1999)
8. Tighten the forcing screw on the end of the tool using a 3/4 inch box wrench until the seal portion is removed and discard the seal.
9. NOTE: The differential fluid seal is a two-piece seal constructed of an outer metal protector and inner rubber seal.
Differential Seal Removal
a. Install Step Plate Adapter 205-DS011 (D80L-630-A) or equivalent into the differential fluid seal opening. Install the Front Cover Seal
Remover 303-107 (T74P-6700-A) and a 5 1/2-inch forcing screw (from 303-323 (T88L-6701-A)) into the differential fluid seal opening.
b. Screw the Front Cover Seal Remover 303-107 (T74P-6700-A) and 5 1/2 inch forcing screw into the outer metal protector portion using a one
inch box wrench.