Sable AWD V6-3.5L (2008)
Taurus X
Special Tool(s)
Special Tool(s)
Removal and Installation
1. Remove the rear lamps.
2. Remove the 8 rear bumper cover screws (4 each side) and 2 scrivets (1 each side) in the wheel well.
3. From inside the luggage compartment, remove the luggage compartment trim panel.
4. Remove the 2 plastic rivets (1 each side) from the upper rear bumper cover.
-
When installing the rear bumper cover, the special tool must be used to install the new rivets.