Sable AWD V6-3.5L (2008)
19. Separate the pivot release cable and casing from the pivot tube release lever and bracket. Remove the pivot release cable.
20. Remove the 8 bolts and cushion frame.
-
To install, tighten to 50 Nm (37 lb-ft).
21. Remove the bolt and LH safety belt buckle.
-
To install, tighten to 37 Nm (27 lb-ft).
22. Remove the bolt and RH safety belt buckle.
-
To install, tighten to 37 Nm (27 lb-ft).
23. To assemble, reverse the disassembly procedure.
50 Percent
SEAT CUSHION - THIRD ROW, 50 PERCENT
Disassembly and Assembly