Sable AWD V6-3.5L (2008)
39. Remove the 2 Y-pipe flange nuts.
^
Detach the exhaust hanger and remove the Y-pipe.
^
Discard the gaskets and nuts.
All wheel drive (AWD) vehicles
40. NOTE: Index-mark the driveshaft for installation.
Remove the 4 bolts (3 shown) and support the driveshaft with a length of mechanic's wire.
All camshafts
41. Remove the drain plug and drain the engine oil.
^
Install the drain plug and tighten to 27 Nm (20 lb-ft).
