Sable AWD V6-3.5L (2008)
82. NOTE: RH shown, LH similar.
Tighten the 4 subframe bracket-to-body bolts to 103 Nm (76 lb-ft).
83. NOTE: RH shown, LH similar.
Install new lower ball joint-to-wheel knuckle nuts.
^
Tighten to 115 Nm (85 lb-ft).
84. NOTE: The hex holding feature can be used to prevent turning of the stud while removing the nuts.
NOTE: RH shown, LH similar.
Install new tie-rod end nuts.
^
Tighten to 115 Nm (85 lb-ft).
