Sable AWD V6-3.5L (2008)
AWD vehicles
91. Line up the index marks on the rear driveshaft to the index marks on the PTU flange made during removal and install the 4 bolts (3 shown).
^
Tighten to 70 Nm (52 lb-ft).
All camshafts
92. Using a new gasket, install the Y-pipe and install the 2 new nuts.
^
Tighten to 40 Nm (30 lb-ft).
^
Attach the exhaust hanger.
93. Install the Y-pipe assembly and 4 new nuts.
^
Tighten to 40 Nm (30 lb-ft).
